Walnut Dash Company

'Why not request a dashboard sample? Simply click here

How To Install

  1. Thoroughly clean the surface of the dashboard or parts onto which the Styling Panels are to be fitted.

    'T-Cut Original' is recommended for this.

    This preparation is very important. All silicone, wax or other polish previously applied must be removed.

  2. Using a hair dryer, thoroughly dry the surfaces to be decorated.

  3. Carefully remove one of the Panels from the backing sheet without touching the adhesive.

  4. Gently position the Panel into place. Press firmly onto the prepared surface especially at the edges and corners.

  5. Gently warm the Panel with a hair dryer and continue to apply pressure using a clean soft cloth.

  6. Leave the Panels to settle for 24 hours. They can then be cleaned and polished using a normal furniture polish and soft cloth. This also removes excess adhesive and T-Cut.

Walnut Dash Company
Unit 8b Moat Farm Business Centre, Turkey Cock Lane, Copford, Colchester, Essex. CO3 8ND,
General Enquiries 01206 791888, Fax 01206 791895